Blanking robot on punch
Cutting robot on punch:
1. Long working hours. It can operate continuously 24 hours a day, and labor must have a rest period.
2. Can replace manual operations for dangerous operations. In some stamping fields, many processes are very dangerous. The principle of the stamping industry is to use the weight of the press to produce. The manual operation is very dangerous. If the stamping robot runs, it will eliminate the boss's With this concern, otherwise breaking hands and fingers would result in a single compensation fee of 300,000 to 400,000.
3. Low cost, pay back in half a year. A robot is about 60,000 to 100,000, the number of axes is different, and the brand will affect the price. In the early stage, the cost will be a lot of money, but in terms of time and month, it is equivalent to the salary of the employee for more than half a year.
4. No pay, high efficiency. Of course, the stamping robot does not need to be paid, and its operating efficiency is very high, which is much lower than the manual error rate.
Reduce the dependence of workers on manual techniques. In China, the proportion of general workers is very high, and the dependence of workers on manual technology is also very large. Society needs progress, and the manufacturing industry must also continue to be technologically advanced and efficient. The replacement of labor by stamping robots will also reduce the manual skills of workers Dependence.
At present, there are many classification methods for stamping robots, and they can generally be classified according to the driving mode, handling weight, coordinate type, control method, and motion trajectory.
According to the driving mode, it can be divided into mechanical manipulator, hydraulic manipulator, pneumatic manipulator and electric manipulator.
According to the handling weight, it can be divided into micro robot, small robot, medium robot and large robot.
According to the coordinate type, it can be divided into rectangular coordinate robot, cylindrical coordinate robot, polar coordinate robot and multi-joint robot, etc .;
According to the control method, it can be divided into fixed program control robot and variable program control robot.
According to the motion trajectory, it can be divided into point trajectory robot and continuous trajectory robot.
Third, the development of robots:
The application of stamping robots in the stamping field is showing increasing advantages. Stamping robot is being widely used in the stamping field. With the continuous development and improvement of stamping robot technology, it will bring a huge change to the stamping field.
Fourth, the robot parameters:
Load weight: load 16KG
Movement radius: 1500MM
Number of axes: 5 axes
Note: When the standard model cannot meet your requirements in efficiency or cost, we provide on-demand customization
1 axis: 400MM
J2 axis: Rotation ± 135 °
J3 axis: telescopic (radius 1500MM, effective stroke can be 650MM
J4 axis: rotation, horizontal plane ± 135 °, angle correction
J5 axis: rotation, vertical plane ± 135 °, workpiece flip
Load: 16KG, the load will decrease as the radius increases, and the product size does not exceed 900 * 900
Five, the development of stamping robots:
The application of stamping robots in the stamping field is showing increasing advantages. Stamping robot is being widely used in the stamping field. With the continuous development and improvement of stamping robot technology, it will bring a huge change to the stamping field!