Introduction and use of meatball machine
Meatball machine is to make meat into a flexible food machinery mechanical structure
Let ’s take pork as an example, first clean the meat and grind it into minced meat by a meat grinder. Then put it into a high-speed beater to beat into meat slurry, and finally put it into a molding machine to make a round object.
The meatball machine operation is very simple, just place the machine in a stable place, connect the power and ground wire to ensure safety,
The machine is equipped with a power of 550 watts, turning counterclockwise, and connecting the water pipe behind the machine. It must be cleaned before use. The machine is a supporting machine.
Working method: First, the meat must be minced in the meat grinder (to remove the meat roots), and then stirred into a meat slurry in a meatball machine, and then placed in a forming machine for processing.
There is a meat volume adjustment switch on the right side of the copper sleeve, which can adjust the roundness of the meatballs (when there is too much meat, the meatballs become longer, and when they are too little, the meatballs become flat,
When the amount of meat slurry in the meat bucket is too small, the machine cannot work normally), a large basin is placed under the meatball outlet, and then filled with warm water.
The machine is equipped with three sets of large, medium and small die heads, which can be replaced by removing the die head in the copper gear and the sliding plate on the copper plate.
After putting the stirred meat slurry into the meat bucket, open the water pipe on the sliding plate to drain water (the amount of water should be small, clean the blade), and then turn on the machine.
After that, the processed meatballs are put into the meat bucket (unshaped meatballs).
After the meatballs are processed, the push rods, meat buckets, copper sleeves and copper plates must be removed, cleaned and dried.
After using for a period of time, check whether the spring inside the machine is available. If there is no spring force, replace it with a new one.
This article originates from Haiyuan Automation Equipment ygztnt.cn